ZorantaGuides
Tankleaf

Tankleaf › Guides

How to Test Aquarium Water: Kits, Steps and What to Test

To test aquarium water, take a sample from the tank, add the reagent or dip a strip as the kit's instructions say, wait the stated time, and compare the colour against the chart in good light. For a freshwater tank the core tests are ammonia, nitrite, nitrate and pH, with KH and GH for hardness.

One reading tells you little on its own. Writing down each result with the date is what turns tests into something you can act on.

Test tubes with coloured water samples beside an aquarium

How to test aquarium water, step by step

  1. Wash and dry your hands, or wear gloves. Lotions and soap can affect results.
  2. Take the sample from mid-water, away from the spot where you just added food or chemicals, and before a water change.
  3. Rinse the test tube with tank water, then fill it to the line. Small differences in volume change the result.
  4. Add the drops in the order the kit lists. Shake reagent bottles first if the instructions say so; some nitrate reagents need a long, hard shake.
  5. Cap and shake the tube, then wait the full time stated. Reading early or late shifts the colour.
  6. Hold the tube against the white part of the colour card in daylight or under white light. Tinted aquarium lighting changes how colours look.
  7. Write the value down straight away, with the date and time.

Test strips follow the same idea: dip for the stated time, hold level, wait, and compare each pad. Close the container right after taking a strip.

Tankleaf

Tankleaf puts all your tests on one screen, shows the full name next to each symbol so NO₂ and NO₃ are easy to tell apart, and shows your last value faintly in each box. Get it on Google Play

Test strips vs liquid test kits

Test stripsLiquid kits
SpeedA minute or two for several valuesSeveral minutes per test
ReadingColour pads, often between shadesColour in a tube, usually easier to judge
AmmoniaNot included on many multi-test stripsSeparate ammonia test available
StorageSensitive to damp once the pot is openedReagents have expiry dates
Typical useQuick checksCycling, troubleshooting, regular records

Hobbyists commonly report that liquid kits give more consistent readings, while strips are handy for a fast check. If a strip shows something unexpected, confirm with a liquid test before acting. Check the expiry dates on both.

What to test, and why

TestSymbolWhat it tells you
AmmoniaNH₃/NH₄⁺Waste the filter has not processed yet; key during cycling
NitriteNO₂⁻Middle stage of the nitrogen cycle; should clear in a cycled tank
NitrateNO₃⁻End product; builds up between water changes
pHpHAcidity; stability matters as much as the number
Carbonate hardnessKHBuffering; low KH lets pH swing
General hardnessGHCalcium and magnesium; matters for many fish, shrimp and plants
Temperature°C / °FCheck daily with a thermometer

Saltwater tanks add salinity, and reef tanks usually add alkalinity, calcium, magnesium and phosphate. Planted tanks may track CO₂, iron or potassium.

Target ranges vary by species. A soft-water fish and a hard-water fish want different pH and GH. Use the breeder, the shop or a species guide to set your targets, and treat ranges printed on test kits as general guidance.

How to test aquarium water for ammonia

Ammonia tests often need two reagent bottles and a longer wait than other tests. Keep to the timing on the instructions. Some kits measure total ammonia; how much of it is in the more toxic free form depends on pH and temperature, which is one more reason to log pH and temperature at the same time.

Tap water treated with chloramine can show ammonia on a test even after a conditioner has been added. Testing your tap water once tells you what to expect. The US EPA explains what chloramine is and why suppliers use it.

How often to test

SituationCommon frequency
Tank cyclingEvery 2 to 3 days: ammonia, nitrite, nitrate, pH
Established tankWeekly before the water change: nitrate, pH; ammonia and nitrite now and then
HardnessMonthly, or after changing your water source
Something looks wrongTest everything straight away
After adding fishAmmonia and nitrite for a week or two

Testing at the same point in your routine, such as just before the weekly water change, makes results comparable from week to week.

Reading results over time

This is general information, not husbandry advice. Follow the instructions supplied with your test kit, and check the needs of your species with a trusted source. If animals seem unwell, ask a vet who treats fish.
Tankleaf

Turn test results into a chart

Tankleaf charts each value over a month, three months, a year or all time, with your target range shaded, so trends show up without a spreadsheet.

Get it on Google Play

iPhone version coming soon

More guides

All guides

Sources

Published by Zoranta, the developer of Tankleaf.