Aquarium maintenance schedule at a glance
| How often | Task | Time it takes (rough) |
|---|---|---|
| Daily | Look at the fish, check temperature, check equipment, feed | 2 to 5 minutes |
| Daily | Remove uneaten food and dead leaves | 1 minute |
| Weekly | Partial water change and gravel vacuum | 20 to 40 minutes |
| Weekly | Test ammonia, nitrite, nitrate and pH | 10 to 15 minutes |
| Weekly | Wipe algae from the front glass | 5 minutes |
| Every 2 to 4 weeks | Rinse filter sponge in removed tank water | 10 minutes |
| Every 2 to 4 weeks | Trim plants, dose fertiliser if you use it | 10 to 20 minutes |
| Monthly | Test KH and GH; clean intake, tubing and impeller | 20 minutes |
| Every few months | Check heater, seals and lights; review stocking | 30 minutes |
Times are a guide for a medium tank. The weekly block is the core of the routine; if you only manage one thing, make it the water change.
Tankleaf turns this checklist into repeating tasks with a reminder at the time you choose; tapping "Done" sets the next date from today, even if you were late. Get it on Google Play
Daily checks
- Count and watch the fish. Missing fish, clamped fins, gasping at the surface or hiding more than usual are early signs of a problem.
- Temperature. Glance at the thermometer. Check what your species need with a species guide or the shop.
- Equipment. Filter flowing, heater light on, air pump running.
- Feeding. Feed what the fish finish in a short time and remove leftovers. Uneaten food becomes ammonia and then nitrate.
- Water level. Top up evaporation with dechlorinated water if needed.
Weekly tasks
Water change
Many keepers start with 10 to 30% a week and adjust from test results. The right amount depends on your tank; our guide on how often to change aquarium water shows how to work it out.
Water tests
In an established tank, testing nitrate and pH each week, plus ammonia and nitrite, catches most problems early. Test before the water change, so you see the level the change has to deal with. Saltwater tanks add salinity and, for reefs, alkalinity, calcium and magnesium.
Glass and decor
Scrape algae from the viewing panes. Wipe the outside glass and lid with a damp cloth rather than a household spray.
Monthly tasks
- Filter media. Squeeze sponges in a bucket of water taken out of the tank, not under the tap. Chlorine in tap water can kill the bacteria that keep ammonia down.
- Don't replace all media at once. If cartridges or sponges are worn out, change part of the media at a time so some bacteria stay.
- Impeller and tubing. Clean the impeller and hoses so flow stays strong. Follow the filter maker's manual.
- KH and GH. Hardness drifts slowly; a monthly test shows the trend.
- Plants. Trim overgrown stems, remove melting leaves, and dose fertiliser as directed on the bottle.
Every few months
- Check the heater against a separate thermometer.
- Look along the silicone seals and under the tank for damp patches.
- Check power cables and plugs for wear, and keep a drip loop in every cable so water cannot run into the socket. Follow the manufacturer's safety instructions for all electrical equipment.
- Review how the fish have grown and whether the tank is getting crowded.
- Replace lights if the manufacturer recommends a replacement interval.
Keeping the schedule going
- Tie the weekly jobs to a fixed day, so the change and the tests happen together.
- Keep an aquarium-only kit together: bucket, siphon, conditioner, test kits, towel.
- Write down what you did and the test results. A log shows when a task slipped and whether a problem started after a change.
- If you are late, do the task and count the next one from the day you did it, rather than doubling up.
- Before a holiday, do the weekly tasks a day or two early and leave clear feeding instructions.
Let the schedule remind you
Add water changes, filter cleaning, feeding, fertiliser and tests to Tankleaf as repeating tasks, and the home screen lists what is due today.
Get it on Google PlayiPhone version coming soon
More guides
- How to Cycle a Fish Tank: Fishless Cycling Step by StepHow to cycle a fish tank before adding fish: the nitrogen cycle, a fishless method step by step, what ammonia, nitrite and nitrate tests show, and when it is done.
- How to Test Aquarium Water: Kits, Steps and What to TestHow to test aquarium water: test strips vs liquid kits, step-by-step testing for ammonia, nitrite, nitrate and pH, how often to test, and how to read results over time.
- How Often to Change Aquarium Water, and How MuchHow often to change aquarium water and how much to take out: a common starting point, what changes it, the nitrate math, and how to set a schedule for your tank.
- High Nitrates in Aquarium Water: Causes and What to DoHigh nitrates in your aquarium? Check the reading, find the cause (feeding, stocking, tap water, filter), bring it down gradually with water changes, and keep it there.
Published by Zoranta, the developer of Tankleaf.