The standards based grading scale 1-4
| Level | Common label | What it usually means |
|---|---|---|
| 4 | Exceeds / Advanced | Applies the standard in new or more complex situations without help |
| 3 | Meets / Proficient | Does what the standard asks, independently and accurately |
| 2 | Approaching / Developing | Gets the simpler parts right; makes errors on the full task |
| 1 | Beginning / Emerging | Can do parts of it with support |
Some schools add half levels (3.5, 2.5) for work that sits between two descriptions, and some use a 1–3 or 1–5 scale instead. A few keep a 0 for "no evidence yet". Whatever the range, the labels should describe what the student did, so a parent reading "2" knows what is missing.
Writing the levels as a short rubric for each standard helps more than the numbers alone. For a standard such as "solves two-step equations", level 3 might be "solves them correctly without prompts", and level 4 "writes and solves an equation from a word problem".
Gradeleaf includes a 1–4 standards-based scale: you enter the level directly, and it averages levels with the category shares and assessment weights you set. Get it on Google Play
Standards based grading scale to percentage
Report cards and transcripts often still need a percentage or a letter. Here are two example charts that schools use. They are examples only: use the chart your school or district has adopted.
| Level | Example chart A | Example chart B |
|---|---|---|
| 4 | 100% | 100% |
| 3.5 | 95% | 90% |
| 3 | 90% | 85% |
| 2.5 | 82% | 77% |
| 2 | 75% | 70% |
| 1.5 | 67% | 62% |
| 1 | 60% | 55% |
Notice what a straight division would do. Dividing the level by 4 turns a 3 (proficient) into 75%, which reads as a C on a typical letter scale, and a 2 into 50%, a failing grade. That is why districts use a chart rather than the raw fraction: the chart keeps "meets the standard" in the range people read as a good grade.
Standards based grading scale 1 4 conversion chart to letters
Some schools skip percentages and convert the average level straight to a letter. An example:
| Average level | Example letter |
|---|---|
| 3.50 to 4.00 | A |
| 3.00 to 3.49 | B |
| 2.50 to 2.99 | C |
| 2.00 to 2.49 | D |
| Below 2.00 | F |
If your school uses percentage bands for letters, see our letter grade percentage scale for the usual cut-offs.
Combining several scores on one standard
A student is usually assessed on the same standard several times. How those scores are combined changes the result. Take three scores on one standard, in order: 2, 3, 3.
| Method | How it works | Result |
|---|---|---|
| Mean | Add and divide by the number of scores | (2 + 3 + 3) ÷ 3 = 2.67 |
| Most recent | Use the last score | 3 |
| Mode | Use the score that appears most often | 3 |
| Decaying average (65%) | Each new score counts 65%, the running result 35% | 2 → 2.65 → 2.88 |
Worked through, the decaying average starts at 2. The second score gives 0.35 × 2 + 0.65 × 3 = 2.65. The third gives 0.35 × 2.65 + 0.65 × 3 = 2.88 (rounded).
The mean keeps early mistakes in the grade for the whole term. The other methods give more weight to what the student can do now, which is the idea behind standards-based grading. Whichever you use, use the same one for every student and say so in your grading policy.
Putting a 1-4 scale into a gradebook
- Enter the level itself (1, 2, 3, 4 or a half level), not a percentage.
- Group assessments by standard or by strand so each one has its own average.
- Decide how levels combine (mean, most recent or a weighting that favors later work).
- Convert to a percentage or letter only at the end, using your school's chart.
- Keep a short note on what the student still needs for the next level.
Behaviour, effort and homework completion are usually reported separately in standards-based grading, so they do not change the academic level. If they are part of your school's model, give them their own category instead of adjusting the levels.
For background on why schools move to standards-based reporting, ASCD's article Grades That Show What Students Know is a useful read.
Keep levels per standard, all term
With Gradeleaf you can set up a category for each standard or strand, enter 1–4 levels, and see each student's average per category on their own page.
Get it on Google PlayiPhone version coming soon
More guides
- How to Calculate Weighted Grades for a Class, Step by StepMultiply each category average by its weight, add the results and divide by the total weight. Worked examples, empty categories, double-weight exams, Excel formula.
- Letter Grade Percentage Scale: A–F Chart With Plus and MinusThe usual A–F percentage cut-offs, a plus/minus chart, the 7-point variant, how to round borderline scores and how to turn points into a letter.
- Total Points vs Weighted Grades: Which Gradebook Setup to UseTotal points lets every point count the same; weighted grades fix each category's share. A side-by-side example, the hidden weights in points grading, and how to choose.
- Zero for Missing Assignments or a 50 Minimum? The Math and the OptionsHow a zero, a 50 minimum or leaving work out changes a student's average, with worked numbers, the arguments on each side and ways to record missing work.
Published by Zoranta, the developer of Gradeleaf.